home *** CD-ROM | disk | FTP | other *** search
- #
- | README file for
- |
- | ELSA Windows 95 Driver Disk, ver 4.03.2113
- |
- | WINNER 3000-M/-L multiboard
- |
- | Copyright (c) 1994-97 ELSA GmbH, Aachen (Germany)
- |
- | Subsidary:
- | ELSA GmbH ELSA Inc.
- | Sonnenweg 11 2150 Trade Zone Blvd.
- | D-52070 Aachen Suite 101
- | Germany San Jose, CA 95131
- | USA
- |
- | Phone : +49-241-606-0 Phone: +1-408-935-0350
- | Support Fax: +49-241-606-6399 Phone: 1-800-272-ELSA
- | BBS (modem): +49-241-606-9800 Fax : +1-408-935-0370
- | BBS (ISDN) : +49-241-606-9820 BBS : +1-408-935-0380
- | CompuServe : GO ELSA CIS : GO ELSA
- | WWW : http://www.elsa.de WWW : http://www.elsa.com
- |
- | 09/05/97, MSuhre
-
-
- Contents
-
- 1. Overview
- 2. Contents
- 3. Installation
- 4. History
- 5. Release Notes
- 6. Known Bugs and Operating Notes
-
-
- ------------------------------------------------------------------------
-
- 1. Overview
-
- This CD contains the ELSA Display Driver for Microsoft Windows 95.
-
- The driver supports 256, 32768, 65536 and 16 Million colors in
- all resolutions available on used ELSA board.
-
-
- ------------------------------------------------------------------------
-
- 2. Contents
-
- This directory contains the following files:
-
- README.TXT the file you currently look at
- LIESMICH.TXT german version of README
-
- EMMNDRV.DRV WINNER 3000-M/-L MULTIman display driver
- EMMND32.DLL MULTIman driver extension
- (DirectDraw&Direct3D HAL)
- EMMNMVD.VXD MULTIman virtual mini display driver
- W3000MMN.INF device information file for
- WINNER 3000-M/-L multiboard
-
- ELSAMON2.INF device information file for ELSA monitors
-
- WINMAN-D.CNT WINman helpfile, german
- WINMAN-D.HLP WINman helpfile, german
- WINMAN-E.CNT WINman helpfile, english
- WINMAN-E.HLP WINman helpfile, english
- WINMAN.DLL WINman control panel extension
- WINMAN.EXE WINman help application
- WINMAN.MON WINman monitor configuration file
-
- In case of trouble during or after installation, please make
- sure you have all the files mentioned above!
-
-
- ------------------------------------------------------------------------
-
- 3. Installation
-
- This section describes the steps to install an ELSA Display
- Driver for Windows 95.
-
- To install the drivers, start the program SETUP.EXE in this
- directory. The installation assistant will help you to install
- the driver with the control panel.
-
- 3.1 First installation of ELSA Display Driver
-
- First install Windows 95 without special drivers for the ELSA
- graphics board. The installation procedure should
- find a PCI VGA-compatible display adapter and ask for a
- "Driver from disk provided by hardware manufacturer".
- - Push the "OK"-button
- - "Copy manufacturer's files from:"
- CD-Drive: this directory (e.g.: E:\WINNER\3000S\WIN95)
- The neccessary files will be copy and Windows 95 asks for
- restart.
- - Push the "Yes"-button
-
- After the restart the configuration of the ELSA display adapter
- Driver starts from the Windows desktop.
-
- - Start the dialog "Properties for Display" by clicking right
- mouse button on the desktop or per Control Panel.
- - Select the Property Page "Settings" or "ELSA WINman".
- - Property Page Settings:
- Standard-Windows-Dialog for changing resolution, color
- depth and font size.
- - Property Page ELSA WINman
- ELSA WINman gives you full control to configure your ELSA
- display adapter perfectly. You can change resolution, color
- depth and refresh rate, bild position etc.
-
- Normally you need to boot your system. Push the button "Restart
- now".
-
- In all following Windows sessions you can change the resolution
- without rebooting your system.
-
-
- ------------------------------------------------------------------------
-
- 4. Revision History
-
- This section describes changes to the previous releases of this
- disk.
-
- Version 4.03.2113:
- - first released version
-
-
- ------------------------------------------------------------------------
-
- 5. Release notes
-
- DirectDraw/Direct3D support
-
- The display driver do support DirectDraw/Direct3D, but to use
- it in an application, you must install DirectDraw/Direct3D.
- The Microsoft DirectDraw/Direct3D components are not included
- in the standard retail version of Windows 95. You need an
- installation of DirectX II/III.
-
- To install DirectDraw/Direct3D start the program DXSETUP in
- the directory \ELSAWARE\DDRAW\DIRECTX on the ELSA CD.
-
-
- ------------------------------------------------------------------------
-
- 6. Known Bugs and Operating Notes
-
- This section documents known anomalies or problems and gives
- hints on work arounds.
-
- There occur misrepresentation of colors and displays by viewing
- MPEG files with ELSAmotion.
-
-
- ------------------------------------------------------------------------
-